X
X

Publicaciones

Año Referencia Revista
2006 Robust Parameter Identification Using Forced Responses. Mario Razeto.
Mechanical Systems and Signal Processing 21, 1008-1025
2005 Improvement of Damage-Assessment Results Using High-Spatial Density Measurements. Mario Razeto.
Mechanical Systems and Signal Processing 19, 123-138
2016 New aspects concerning the generation of acoustic emissions in spur gears, the influence of operating conditions and gear defects in planetary gearboxes . Molina, Cristian.
Insight, Vol 58, No 1, January 2016. DOI: 10.1784/insi.2016.58.1.18
2016 Evaluation of the vibration performance response of insulating floor panels under human walking conditions. Molina, Cristian.
Revista de la Construcción. Journal of Contruction, Vol 15, No 2, pp. 19-27
2015 Damage Assessment of Rolling Element Bearing Using Cyclostationary Processing of AE Signals with Electromagnetic Interference. Molina, Cristian.
In Book: Cyclostationarity: Theory and Methods II (ISBN: 978-3-319-16329-1), Springer.
2014 Effects of operating conditions on the Acoustic Emissions (AE) from planetary gearboxes. Molina, Cristian.
Applied Acoustics 77, 150 - 158
2014 Caracterí­sticas vibratorias de transmisiones planetarias de una etapa. Molina, Cristian.
Ingeniare. Revista chilena de ingeniería, vol. 22 Nº 1, pp. 88-98
2014 Dynamic and phenomenological vibration models for failure prediction on planet gears of planetary gearboxes. Molina, Cristian.
J Braz. Soc. Mech. Sci. Eng. 36:533-545
2014 Cyclostationary Processing of Vibration and Acoustic Emissions for Machine Failure Diagnosis. Molina, Cristian.
In Book: Cyclostationarity: Theory and Methods (ISBN: 978-3-319-04186-5), Springer.
2012 Theoretical frequency analysis of vibrations from planetary gearboxes. Molina, Cristian.
Forschung im Ingenieurwesen: Volume 76, Issue 1, Page 15-31
2013 Modelo dinámico de la zona de contacto en prensas de máquinas papeleras. Saavedra, Pedro.
Revista de Información Tecnológica, vol 24 Nº4, pp. 75-84
2013 Diagnóstico de la condición de las barras de motores de inducción. Saavedra, Pedro.
Revista de Información Tecnológica, vol 24 Nº4, pp. 85-94
2006 Accurate assesment of computed order tracking. Saavedra, Pedro.
Shock and Vibration, 13, 13-32
2005 New Revolution-Order Transform for Analysing Non-Stationary Vibrations. Saavedra, Pedro.
Insight 47(1), 29-35
2004 Vibration Analysis of Rotors for the Identification of Shaft Misalignment. Part 2: Experimental Validation . Saavedra, Pedro.
Journal of Mechanical Engineering Science 218 Part C, 987-999
2004 Vibration Analysis of Rotors for the Identification of Shaft Misalignment. Part 1: Theoretical Analysis. Saavedra, Pedro.
Journal of Mechanical Engineering Science 218 Part C, 971-985
2002 Vibration Analysis Applied to Low Speed Machines in Pulp and Paper Industries. Saavedra, Pedro.
Tappi Journal, January 2002, Vol 85, Nº1.
2002 Vibration Analysis of Rotor for Crack Identification. Saavedra González.
Journal of Vibration and Control, Volume 7
2002 Vibration Analysis of Mining Shovels . Saavedra González.
Canadian Institute of Mining, Meallurgy and Petroleum CIM Bulletin, 95, 1-66
2002 Integrated approach to induction motor fault diagnosis. Saavedra, Pedro.
Integrated approach to induction motor fault diagnosis
2001 Condition monitoring of variable-speed and load machinery using time-frequency distributions. Saavedra, Pedro.
INSIGHT Vol. 43, Nº8, August, pp. 526-530
2001 Crack detection and vibration behavior of cracked beams. Saavedra, Pedro.
Computers and Structures, Volume 74 Nº16, pp. 1451-1459.
2018 Transition from spray to roping in hydrocyclones. Pérez, D., Cornejo, P., Rodríguez, C., Concha F..
Minerals Engineering, Volume 123, pp. 71-84
2018 A model to estimate a natural frequency based on the vibrational response of a system excited by a high acceleration sine sweep. I. Tomasov, C.G. Rodriguez.
Ingeniare
2016 Non-Linear Model of Vibrating Screen to Determine Permissible Spring Deterioration for Proper Separation . Rodriguez, C.G., Moncada, M.A., Dufeu, E.E., Razeto, M.I..
Shock and Vibration
2016 Response of a vibrating screen when it loses stiffness in the supports. Moncada, M., Rodríguez, C.G. .
Ingeniare. Revista Chilena de Ingeniería. Vol. 24 N° Especial 2016, pp. 25-31
2015 Condition monitoring of Pump-turbines. New challenges. E. Egusquiza, C. Valero, D. Valentin, A. Presas, C.G. Rodriguez.
Journal of the International Measurement Confederation, Volume 67, pp. 151-163
2014 Monitoring of rotor-stator interaction in pump-turbine using vibrations measured with on-board sensors rotating with shaft. C.G. Rodríguez, B. Mateos-Prieto, E. Egusquiza.
Shock and Vibration
2012 Capability of structural-acoustical FSI numerical model to predict natural frequencies of submerged structures with nearby rigid surfaces. Rodriguez, C.G., Flores, P., Pierart, F.G., Contzen, L.R., Egusquiza, E..
Computers and Fluids
2012 Failure investigation of a large pump-turbine runner. Egusquiza, E., Valero, C., Huang, X., Jou, E., Guardo, A., Rodriguez, C..
Engineering Failure Analysis, Volume 23, pp. 27-34
2010 Experimental modal analysis in submerged cantilever plate with nearby rigid wall. Rodriguez, C.G., Pierart, F.G., Contzen, L.R., Egusquiza, E..
Proceedings of ISMA 2010 - International Conference on Noise and Vibration Engineering, including USD 2010 pp. 2591-2595
2007 Frequencies in the vibration induced by the rotor stator interaction in a centrifugal pump turbine. Rodriguez, C.G., Egusquiza, E., Santos, I.F..
Journal of Fluids Engineering, Transactions of the ASME 129(11), pp. 1428-1435
2007 Numerical simulation of fluid added mass effect on a francis turbine runner. Liang, Q.W., Rodríguez, C.G., Egusquiza, E., Escaler, X., Farhat, M., Avellan, F..
Computers and Fluids 36(6), pp. 1106-1118
2006 Experimental investigation of added mass effects on a Francis turbine runner in still water. Rodriguez, C.G., Egusquiza, E., Escaler, X., Liang, Q.W., Avellan, F..
Journal of Fluids and Structures 22(5), pp. 699-712
2006 Accurate assessment of computed order tracking. Saavedra, P.N., Rodriguez, C.G..
Shock and Vibration 13(1), pp. 13-32
2016 Caracterización experimental y modelación de una bomba de calor reversible para un vehiculo electrico. Cristian Cuevas.
ngeniare. Revista Chilena de Ingenieria. Vol. 24 N° Especial 2016, pp. 40-48
2012 Testing and modeling. International Journal of Refrigeration. Cristian Cuevas.
nternational Journal of Refrigeration, Volume 35, Issue 4, June 2012, pp. 841-849
2011 Thermo-hydraulic characterization of a louvered fin and flat tube heat exchanger . Cristian Cuevas.
Experimental Thermal and Fluid Science 35 (2011) pp. 154-164
2011 Experimental study of the energy and thermal comfort performance of chilled ceiling panels. Cristian Cuevas.
HVAC&R Research, 17(3):337-393, 2011
2011 Thermo-hydraulic characterization of an automotive intercooler for a low pressure EGR application. Cristian Cuevas.
Applied Thermal Engineering 31 (2011) pp. 2474-2484
2010 Characterization of a scroll compressor under extended operating conditions. Cristian Cuevas.
Applied Thermal Engineering 30 (2010) pp. 605-615
2010 Radiant ceiling systems coupled to its enviroment part 1: Experimental analysis . Cristian Cuevas.
Applied Thermal Engineering 30 (2010) pp. 2187-2195
2010 Radiant ceiling systems coupled to its enviroment part 2: Dynamic modeling and validation. Cristian Cuevas.
Applied Thermal Engineering 30 (2010) pp. 2196-2203
2010 Testing and thermal modeling of radiant panels systems as comissioning tool. Cristian Cuevas.
Energy Conversion and Management 51 (2010) pp. 2663-2677
2010 Natural convection at an indoor glazing surface with different window blinds. Cristian Cuevas.
Energy and Buildings 42 (2010) pp. 1685-1691
2010 Experimental and theoretical study of adiabatic humidification in HVAC&R applications . Cristian Cuevas.
Ingeniare. Revista chilena de ingeniería, vol. 18 Nº2, 2010, pp. 243-252
2009 Testing and Modeling a Scroll Expander Integrated into an Organic Rankine Cycle. Cristian Cuevas.
Applied Thermal Engineering 29, 3094-3102
2009 Development and Validation of a Condenser Three Zones Model . Cristian Cuevas.
Applied Thermal Engineering 29, 3542-3551
2009 Testing and Modelling of a Variable Speed Scroll Compressor . Cristian Cuevas.
Applied Thermal Engineering 29, 469-478
2008 Development of Simple Cooling Coil Models for Simulation of HVAC Systems. Cristian Cuevas.
ASHRAE Transactions 114(1), 219-328
2008 Testing and Modeling of an Automotive Wobble Plate Compressor. Cristian Cuevas.
International Journal of Refrigeration 31(3), 423-431
2004 Natural Convection at an Indoor Glazing Surface . Cristian Cuevas.
Building and Environment 39, 1049-1053
2003 New Approach for performance testing of air-cooled condensing units . Cristian Cuevas.
Experimental Thermal and Fluid Science 2003; 27(7): 781-787
2010 Natural convection at an indoor glazing surface with different window blinds. ​Adelqui Fissore.
Energy and Buildings 42 (2010) pp. 1685-1691
2007 Thermal Simulation of an Attached Sunspace and its Experimental Validation. ​Adelqui Fissore.
Solar Energy 81, 305-315
2007 Measurement Results and Experimental Analysis Study of the Thermal Balance of a Window . ​Adelqui Fissore.
Building and Environment 42, 3570-3581
2007 Experimental Study of the Thermal Balance of a Window, Design Description. ​Adelqui Fissore.
Building and Environment 42, 3309-3321
2004 Natural Convection at an Indoor Glazing Surface. ​Adelqui Fissore.
Building and Environment 39, 1049-1053
2007 Theoretical and Experimental Study of the Natural Draft in Chimneys of Buildings for Domestic Gas Appliances. Oscar Farías.
Energy & Buildings
2003 Real-time monitoring and characterization of flames by principal component analysis. Oscar Farías.
Combustion and Flame 132 (3), 591 - 595
2002 Simplified Modelling of an Open-Type Reciprocating Compressor. Claudio Saavedra.
International Journal of Thermal Sciences, Volume 41, Issue 2, February 2002, Pages 183-192
2002 Experimental analysis and Simplified Modelling of a Hermetic Scroll Refrigeration Compressor . Claudio Saavedra.
pplied Thermal Engineering, Volume 22, Issue 2, February 2002, Pages 107-120
2011 Mathematical Modeling of Coal Gasification in a Fluidized Bed Reactor Using Eulerian Granular Description. Farías F, Oscar.
International Journal of Chemical Reactor Engineering, vol. 11, 2011, Article A2
2017 On the numerical simulation of sheet metal blanking process. C. Canales, P. Bussetta, J.-P. Ponthot..
International Journal of Material Forming 10 (2017) 55-71
2016 Numerical prediction of ductile failure in the blanking process by means of uncoupled and coupled phenomenological damage models. C. Canales, J.-P. Ponthot.
MATEC Web of Conferences 80 (2016) 03006
2016 A numerical study of hypoelastic and hyperelastic large strain viscoplastic Perzyna type models. C. Careglio, C. Canales, C. Garca Garino, A. Mirasso, J.-P. Ponthot.
Acta Mechanica 227 (2016) 3177-3190
2017 Application of uncoupled damage models to predict ductile fracture in sheet metal blanking. C. Canales, R. Boman, J.-P. Ponthot.
Key Engineering Materials 725 (2017) 483-488
2016 Non-Linear Model of Vibrating Screen to Determine Permissible Spring Deterioration for Proper Separation. Emilio Dufeu.
Shock and Vibration, In Press
2017 Multiscale characterization of nano-engineered fiber-reinforced composites: Effect of carbon nanotubes on the out-of-plane mechanical behavior . Carlos Medina.
Journal of Nanomaterials, InPress
2016 Effect of ZnO nanoparticles obtained by arc discharge on thermo-mechanical properties of matrix thermoset nanocomposites. Carlos Medina.
Journal of Applied Polymer Science
2015 Comparison of push-in and push-out tests for measuring interfacial shear strength in nano-reinforced composite materials. Carlos Medina.
Journal of Composites Materials, 2015, in press
2015 Quality and high yield synthesis of Ag nanowires by microwave-assisted hydrothermal method. Carlos Medina.
Nanoscale Research Letters, 2015, pp. 10-48
2015 Influence of aramid fibers on the mechanical behavior of an epoxy compound reinforced with carbon and aramid. G. Pincheira, C. Canales, C. Medina, E. Fernández, P. Flores.
Journal of Materials: Design and Applications
2014 The influence of carbon fabric weave on the in-plane shear mechanical performance of epoxy fiber-reinforced laminates . C. Medina, C. Canales, C. Arango, P. Flores.
Journal of Composites Materials, Volume 48 (23), 2014, pp. 2871-2878
2013 The effect of multiwall carbon nanotubes on the in-plane shear behavior of epoxy glass fiber reinforced composites. C. Fernández, C. Medina, G. Pincheira, C. Canales, P. Flores.
Composites: PartB, Volume 55, 2013, pp. 421-425
2015 Evaluating the longitudinal stability of an UAV using a CFD-6DOF model. Frank Tinapp.
Aerospace Science and Technology, en prensa